R/C Tech Forums - View Single Post - Tekno RC EB410 Thread
Thread: Tekno RC EB410 Thread
View Single Post
Old 02-23-2020, 07:16 AM
  #5186  
billdelong
Tech Champion
iTrader: (33)
 
Join Date: Mar 2011
Location: Austin,TX
Posts: 6,194
Trader Rating: 33 (97%+)
Default
So I had modified the OG chassis back in OCT-2017, and there were some naysayers who claimed that it would weaken the chassis where I had drilled the holes:
Originally Posted by billdelong
so the instructions call for the PTX to be mounted under the steering rack, but due to the milling, there wasn't enough of a flat spot to get full coverage with double sided tape so I decided to drill a couple holes in the chassis to play it safe. I used a Permagrit countersink for the bottom.




I have sold the car over a year ago and it has transferred ownership to 2 different owners since then, just yesterday the new owner finally broke the original chassis, after 2.5 years of racing!

Take special note that the break was along the screw hole for the diff case, no where near the holes I drilled for the PTX, ha!


billdelong is offline  
Reply