R/C Tech Forums - View Single Post - Tekno ET48 Thread
View Single Post
Old 02-15-2020 | 07:52 AM
  #5508  
nicochau
Tech Initiate
 
Joined: Mar 2019
Posts: 29
From: Los Angeles
Default

Check every shock individually by moving the suspension arm up and down. You should have some normal resistance. If one of the shocks has a problem, it will feel different and most likely show less resistance.

Make sure all shocks function properly through the full suspension range.

For the ride hight, you can adjust it with the nuts that are on the shock body and that hold the springs. Turn that nut down on each side and the truggy will lift up.
nicochau is offline