R/C Tech Forums - View Single Post - HV Servo question
Thread: HV Servo question
View Single Post
Old 02-12-2020 | 05:46 AM
  #9  
billdelong
Tech Champion
iTrader: (33)
 
Joined: Mar 2011
Posts: 6,410
From: Austin,TX
Default
If your BEC is limited to 6V and you still want to run the servo on 8.4V, then you can pull the HV from the balance wire like this:
How to wire HV Servo from 2S LiPo


billdelong is offline  
Reply