R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
Thread: Tekno RC SCT410.3 Thread
View Single Post
Old 12-16-2019 | 12:06 PM
  #5934  
sebtarta
Tech Addict
iTrader: (8)
 
Joined: Jun 2009
Posts: 691
From: RC Track
Default
Originally Posted by dbld49
You don't have to purchase new turnbuckles. Just grind/cut 3mm from each end of the stock turnbuckles.
Yes I had a set of Serpent turnbuckles which are 50mm long while the SCT are 56mm long. The Serpent ones helped, but it still needs to be slightly shorter. Which in essence the 50mm is the width that you are saying to have after chopping 3mm from each side.
sebtarta is offline  
Reply