I need help with a steering servo set up issue on my B6. I have watched all the videos and read every tip on the servo installation and none of them address my problem. I am using an Xpert pi3431 servo with the AE team aluminum horn. The car also has the team aluminum bellcranks. After looking at all the car set up pictures I could find it looks like the ball end in the servo horn should be even (front to back) with the ball end in the bellcrank. The issue I’m having is when the servo horn is a 90deg to the servo the bellcrank pa are not centered. The are shifted to the left as if the steering link is too short.