R/C Tech Forums - View Single Post - Starter Box Recommendations?
View Single Post
Old 08-13-2019, 10:54 AM
  #19  
lil-bump
Tech Elite
iTrader: (89)
 
lil-bump's Avatar
 
Join Date: Aug 2006
Location: The Cold Great Lakes
Posts: 3,036
Trader Rating: 89 (100%+)
Default

Originally Posted by dan_vector
I run an LRP starter box which can be used for 1/10 and GT8/off-road. Just 4 screws and the wheel rotates around. So one starter box fits all.
The HUDY is typically overpriced for what it is (it’s HUDY = overpriced! I mean they’ve just released a metal sweet tin for goodness sake ) and is limited because you then need 2 different boxes for 1/10 and another for GT8.
For what it’s worth I had an xceed box for several years before I started racing GT8 and used it for 1/10 and 1/8 - personally never had an issue with the wheel wearing out. All I did was lift up the wheel mechanism by using 2mm spacers under it. It’s because the wheel is a bit too low as standard so it can slip and wear out. Small adjustment to ensure proper engagement and no issues.
I too raised the wheel with small 1 mm shims this does help. But anything pass 2mm and the belt will hit the top plate.
lil-bump is offline