R/C Tech Forums - View Single Post - Tekno RC ET410 Thread
View Single Post
Old 05-25-2019, 05:47 AM
  #891  
rustyus
Tech Master
iTrader: (1)
 
rustyus's Avatar
 
Join Date: Apr 2014
Location: central PA
Posts: 1,142
Trader Rating: 1 (100%+)
Default

While on the spring subject, my stock Yellow rear springs are too short to allow me to get the ride height I am after. At full droop, I have the shock adjustment collars just touching the top of the springs. When I push the truggy down; let the shocks do their thing; the ride height is too great, and I can not get the rear to "bones level". If I loosen the collars to get bones level ride height, the rear springs will come off the spring perch at full 108mm droop...not good.

I had to go to the softer rear Green springs in order to (barely) get my ride height that I was after.
rustyus is offline