Originally Posted by
scott_0
so I got my et410 yesterday, bought it from a guy on facebook on the tekno buy/sell group, great truck that was never ran. he had it converted to front mount rear shocks, I want to run a Finnisher body so I converted it back to rear mounted shocks, after getting it all back together, my spring and spring cups are barely kissing the driveshaft/dog bone on both sides of the truck, I ending up making a pair of plastic spacers to get the needed space, anyone else have this issue? I went by the manual and verified everything is put together properly
Originally Posted by
Tbuggy
The EB does it too. You can solve this with a 1-2mm spacer.
I also spaced the bottoms of the shocks back 2mm to make sure the springs cleared everything. While I was at it, I replaced the TKR1240 M3x18mm Shock Mnt Screws with normal M3 20mm button head screws. I never had a screw come undone on an arm before. The reverse threads on the TKR1240 screws would just mess me up on my screwing/unscrewing practices
.
