Originally Posted by
mfgranizo
Hi, please some help.
I just finished building my srx8. and hopefully this Saturday will trayit in the club. I have the werks 34mm pro clutch 4 alum shoes, that I used previously in my IGT8. and now have problems assembling it whit the stock serpent clutch bell that comes with the kit. as soon I tight the srew the bell does not run free, is stuck . as soon as I loose a litter bit the screw the bell runs free as is supose to be . with the stock serpent clutch I have no problems.
Do any buddy is using the werks clutch_. have the same problem_.
Sorry for my English, im from Guatemala
The easiest way is just use the standard Serpent clutch which is fine if properly setup. It's really good running the Yellow shoes with X-hard springs. Even the stock carbon with X-hard springs works well.
Otherwise if you insist on using the werks clutch you will need to extend the crankshaft by using a spacer on the end of the shaft or use a longer crankshaft extension top hat.