Originally Posted by
dvaid852456
Thanks Krio,
The radio does not turn on but all is fine with another ESC plugged in. i just tested it with the same settings and it seemed fine.
A different battery makes no difference.
The ESC is recognised by the software and I am able to change settings
I tested the switch with a multi-meter and the switch is operational.
If the hotwire still talks to the esc, try downgrading and then re-uploading the firmware version. That has fixed some esc's in the past for myself and some locals. This issue was more common years ago, though. Not sure if it's still the same problem.