R/C Tech Forums - View Single Post - Kyosho Evolva
Thread: Kyosho Evolva
View Single Post
Old 04-26-2005, 11:35 AM
  #869  
kevink2
Tech Elite
 
kevink2's Avatar
 
Join Date: Nov 2001
Location: Glendale, Calif.
Posts: 2,154
Default Re: Re: Evolva 2005

Originally posted by performula
I wish I could read Japanese.
Combat power of maturing, draws the world!
The world champion machine acquiring up-to-date efficiency!

In the Italian Sicilian island, is held on 2005 March 16th - 20th with 1/8 racing car pre- world championship of the IFMAR sponsorship which, the lower high chapter player drives エボルバ 2005 which & シリオ S21PR PRO beautiful victory! Furthermore the コラーリ player acquires also TQ with the machine of the same package. Beautiful actual proof superiority of up-to-date version. We probably will deliver the running of the strongest leading edge of 1/8 racing cars, to you now!



Approximately adding the bearing installation structure by the eccentric cam in the bulkhead. Belt tension in 8 stages adjustment possibility.

In addition to former center, belt tension adjustment to become possible even at front and back, substantial improvement efficiency and durability.

Announcing powerful stopping power with the new brake lever which improves lever ratio.

Adopting the gear which is optimized in the up-to-date high power engine. Gear ratio of course thing, takes a second look addendum modification coefficient, actualizing high durability with all gears.

Taking a second look suspension arm installation structure, in the short wheel base variable conversion. At maximum 3mm width adjustment possibility.

As for wheel based adjustment with just inserting of spacer OK.

Front upper arm installation position (form of upper suspension bracket), geometry with such as modification furthermore optimization.

To provide the air flow room inside the tank cap, stabilization the pressure from the muffler. You hold down the air fuel ratio fluctuation immediately after the starting which is called the full tank illness, actualizing the fuel force which is always optimum.


Chassis technical data
Total length 437mm
Total width 262mm
All high 93mm
Gross load Approximately 2,500g
Wheel base 297 - 294mm
Tread (F/R) 217/202mm
Tire (F/R) 69×36mm/76×60mm
Gear ratio 7.35 / 5.40: 1
Engine 21 class (selling separately)

Those which are necessary for travelling
プロポ/
2ch2 servo for each company car
Body
Fuel, starting equipment
kevink2 is offline