Originally Posted by
DPowers
tried but cant read it even when i try to blow it up it just becomes blurry.
1) start with radio on and esc off, but booked up to battery
2) hold the set button on the esc while pressing the on/off button. Release the button once the led flashes.
3) set neutral point, press set button (green led flashes and motor beeps once)
4) set throttle (pull trigger), press set button (green led flashes and motor beeps twice)
5) set brake (push trigger), press set button (green led flashes and motor beeps 3 times).
Those are the directions for calibrating your radio to the esc.