I have a tt-02 with the tble-02 esc and brushed motor that came with it. Using a Spectrum DX4C radio with the AVC traction control reciver. Worked fine for few weeks. Now the ESC stop working started blinking red and then went up in smoke. Tried another tble-02 ESC and noticed it getting hot just plugged in. Then I installed new motor. The LED on it turns green like it should when using it, but now it only has brake and reverse. Not sure what to do next. The LHS told me it could be the AVC reciver or because I removed all the tamiya plugs and soldered a better battery plug and directly to the motor. I used that reciver on 2 other cars with no problems. The others were brushless. I checked voltage at motor ends. Full throttle went to about 11v then back down to about 6v. Brake about 6v and reverse about 3v. Anyone have this problem?