View Single Post
Old 03-11-2019, 07:13 PM
 
EMU
Tech Fanatic
iTrader: (3)
 
EMU's Avatar
 
Join Date: Apr 2009
Location: NYC
Posts: 838
Trader Rating: 3 (100%+)
Default

Originally Posted by Kremzeek View Post
It looks like it will work if I move my damper and shock forward by using the 102mm hole on my PN LCG V4 motor mount. Seems to be a common config.
have you considered using an LM height damper plate for more clearance? As long as you have the clearance using the more forward hole, you should be fine. But, you may need to adjust springs to dial in the rear. You will have a slight chance in the geometry of the damper.
EMU is online now  
Reply With Quote