R/C Tech Forums - View Single Post - How to remove part stuck with thread lock
Thread: How to remove part stuck with thread lock
View Single Post
Old 02-19-2019 | 11:39 PM
  #1  
FDDA15
Tech Initiate
iTrader: (10)
 
Joined: Apr 2015
Posts: 43
Default How to remove part stuck with thread lock
Having an issue removing front axles from my B6. I am able to remove the screw holding the axle in but the axle will not release from the bearings. Trying to do this without damaging the hub. Please advise
FDDA15 is offline  
Reply