View Single Post
Old 02-15-2019, 01:38 PM
Tech Regular
iTrader: (9)
Join Date: Apr 2016
Posts: 339
Trader Rating: 9 (100%+)

So to ask the same question slightly differently…. If you know the car is tweaked. What do you do:

1. Do you first adjust the preload spring collar to compensate for the tweak so that both wheels lift up at the same time, then put the car on the Setup Board or

2. Do you adjust spring collar for ride height and making sure that the preload are the same for left and right (same amount of turns). Then put it on the setup board. Then check for tweak and adjust preload as necessary…and done.
johnzhou2476 is offline