The timing profiles add boost into the ESC IAW the specs listed below. This timing will be in addition to any static timing on your motor. You may need to add the fan to the motor; if you were at 30* motor timing you will be at 55* timing at the end of the boost program and may be making a lot of heat. When running boost the preferred setup was to lower motor static timing to account for boost advancement of the timing. Check your motor temps often to make sure you are not overheating the system.
TP1: Spec Stock "blinky mode" 0*timing boost
TP2: 15* Timing Boost / RPM Range 5443-20,016
TP3: 25* Timing Boost / RPM Range 5443-20,016
TP4: 35* Timing Boost / RPM Range 5443-20,016
TP5: 45* Timing Boost / RPM Range 5443-20,016