The steering bearings are 4x7x2.5mm if that helps anybody else find some to replace bushings.

I'm putting in a Leopard 2838 4-Pole Brushless Sensored Motor 4700KV, tekin rs esc, and I'll be running 1/10 rear buggy tires. Any guesses at gearing? I can only find a 15t or 18t in a mod .5 with 1/8 bore. Guess I'll start with 15 since i have bigger tires and slightly higher kv and see what happens. Not sure how the larger can motor will change things gearing wise. The motor fits no problem just needed to swap in some m3 screws.