Hi,
need some advice on xray x12 2019 (EU edition) setup.

We are running with 13.5T stock on medium-high grip track which is about 30x9.5 meters. One unusual thing of the track - air temperature about 7-9C.
Car feels quite OK, but it's about 0,4 sec slower than crc xti wc.

Main problem - after entering corner from mid point car pushes to outside.
I have tried all setups from internet, but no mater which setup I use, car still have same outside push at Mid point of corner.
Also I have tried different tyre combinations - didn't helped.

Today I took my old crc xti wc and with stock setup (from manual) it was going like on rails and after few laps I've set my best lap time, so this tells me that this shouldn't be driver error, it's something with xray setup, but can't figure out what exactly is wrong.