Originally Posted by
Botlebruiser
The parts are sold separately. I was curious if someone could give us a list of the part numbers needed to only do the c-hub conversion. That’s all I need as well.
Easy;
1x A2141L - Left C-Hub
1x A2141R - Right C-hub
1x A2143 - C-Hub Bushing
2x A2102 - Rear Alum bulkhead
2x A2121 - Rear Camberlink Mount
1x A2806 - Alum Turnbuckle (28mm)
1x A2810 - Ball link set
1x T2803 - Uniball
1x A2304 - Steering Stopper collar (recommended to use the 5.5 or 6mm)
Also need the following hardware;
For bulkheads camberlink mounts;
4x M3x10 Countersink screw + 4x 2mm shim (for mounting camberlink mount to bulkhead, as per the rear)
2x M3x8 Set screw (for attaching camberlink ball)
For C-Hub
2x M3x8 Button head (lower kingpin)
2x M3x12 set screw (upper kingpin)
And then add other shims for settings as required.
HiH
Ed