For those getting ready for Stock Wars next weekend, 7-9 December, here are a few key things to remember (below). In addition to standard ROAR rules, we are following
Can-Am RC Series rules.
1) Racers must have male 3.5mm bullet connectors on their speed control leads to the motor. There is absolutely no soldering allowed on the Can-Am motor tabs.
2) Fixed gearing applies to all Can-Am classes.
-TC is a minimum 5.40 FDR, nothing lower.
-USGT is a minimum 4.40 FDR, nothing lower.
-F1 must run fixed pinion (28t 64p) / spur (92t 64p)
-1/12 must run fixed pinion (56t 64p) /spur (72t 64p)
3) Can-Am motors will be issued randomly each morning and returned to tech each evening. Can-Am motors must not leave the track.
The track does have several sets of TQ Wire's 3.5mm male bullets (the best in the business) available for purchase. Also, 180 does have several 72T 64P spur gears available. We have a few 56T 64P pinions on the way for next weekend as well.
If anyone should need 92T 64P spurs, or 28T 64P pinions for F1 and does not have a hobby shop, or favorite online shop to purchase from, please let me know ASAP.