R/C Tech Forums - View Single Post - Need help binding XP-R4 receiver
Thread: Need help binding XP-R4 receiver
View Single Post
Old 11-18-2018 | 04:18 AM
  #2  
rustyus's Avatar
rustyus
Tech Master
iTrader: (1)
 
Joined: Apr 2014
Posts: 1,296
From: PA
Default
You will need a binding plug to connect the two pins on the receiver side. After the bind plug is inserted, receiver's LED flashes; the transmitter can now be turned on and you then should have a steady LED on the receiver.
rustyus is offline  
Reply