KO Propo BX-212 Advance Digital Charger

KO Propo is well known for its high-quality radios, servos and chargers. The BX-212 charger is powered by a 12V power source and is capable of charging from 1 to 10 Ni-Cd cells. You choose the charging amp rate by turning the black knob on the front of the unit. The amp rate ranges from .3 to 5. Press the start button on the charger to start the charging process. Next to the start button is the select button that allows you to change the display on the LCD screen above the buttons. The display shows the voltage of the battery as it is charging, the amps it is charging at, charging time, voltage at peak and the voltage being supplied to the charger. The LED on the face of the charger turns green when it is being powered and red when voltage drops below the required amount; a tone also sounds. Clips on the front of the charger attach the output wires to it. The BX-212 uses peak detection to determine when the battery has reached full capacity and stops the charging process. The metal case and aluminum heat sinks keep the charger's circuits cool.

...........selling at 3k

You can reach me at 09202914645