R/C Tech Forums - View Single Post - Lets talk about motors
View Single Post
Old 10-28-2018 | 08:28 PM
  #33  
Bry195
Tech Master
 
Joined: Jul 2018
Posts: 1,011
From: Florida
Default

Originally Posted by gubbs3
When people talk of sensorless combos cogging is the most common word thrown around. This can describe stuttering when starting from a stop, or jumping backwards briefly, as well as hestation and/or surging when trying to work fine throttle inputs. I only race so I can't really comment on how much this is still an issue with modern sensorless setups.

Many also talk about smoothness in a much more subjective sense. The subjectivity is difficult to articulate because it cannot be described by symptoms. In order to fully grasp "smooth" versus "really smooth" you need to try piloting a 12th scale mod that can backflip at will or a mod TC that can spin all four tires an entire 100' straight.
I may move to 12th. i said I wouldnt buy more than 1 TC or 1 motor or...

I should calculate inertia mismatch and see where i sit.
does one type of rotor tend to have more mid to max rpm roughness? Or looking at it down wind from the motor a high or low FDR? Or heavy light vehicle?
Bry195 is offline