Thread: Mugen MTX-3
View Single Post
Old 04-19-2005, 07:21 PM
Tech Master
iTrader: (14)
roadrage's Avatar
Join Date: Mar 2004
Location: Palm Bay, FL.
Posts: 1,236
Trader Rating: 14 (100%+)
Default Re: rear end traction

Originally posted by gentleman81
what is the trick to getting the rear end of the mtx3 to stay planted in the turns, tight turns at that. i intially had a problem with turn in and pushing alot, now i have that pretty much under control. now the car wants to whip around no brakes applied? i can turn in fine but mid corner it will just spin out most of the times off throttle. where would i go from stock setup.

i have the 2.5mm sway at the softest setting (at the ends)
and the front bar flat (softest also)
dark blue springs at the lowest wholes
try putting the light blue springs on, since they are softer this will give it more rear end grip, but also cause it to push coming out of the turn.
roadrage is offline  
Reply With Quote