View Single Post
Old 06-07-2018, 09:40 PM
  #8  
Soyer
Tech Adept
iTrader: (5)
 
Join Date: Jan 2018
Posts: 121
Trader Rating: 5 (100%+)
Default

Yea I checked the opening. Running the 5.8mm incert idle gap is at .7mm now right Lsn is a hour or two in from flush and havenít touched the msn. Running p4 gold
Originally Posted by stanleyw808 View Post
Hello Soyer,

Before adding Head Shim, You might try to use a colder plug, maybe P4 for Your B2101. And 3mm "in" for the High Speed Needle is suspiciously something not commonly right. Did You check the carb opening, the carb slide might not open fully so that You keep leaning the top to get a "good" top end.
Soyer is offline