R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 04-17-2005 | 09:05 PM
  #12630  
Trips's Avatar
Trips
Tech Elite
iTrader: (16)
 
Joined: Aug 2001
Posts: 2,251
From: 360 Speedway
Default Re: Hara Hammer setup

Originally posted by CarlosG.
Hello, I was wondering If anybody has a good setup for the Hara HAmmer 12 for onroad and carpet. I have tried the setup from one website, but I don't know about the items that don't convert to english. Also I can't figure out what HPI J tire compound and Xenon Aqua compounds are.
For carpet:
TRC purple tires 42mm on Old Skool front end, .020 springs, ride height 3.5mm. Toe-in 0 or slightly out. Camber -1/2 degree.

Firmest of the three kit shock springs on the shock, 30 wt. oil, kit stock tweak springs, TRC grey tires 44 mm. A few drops of Losi thin hydradrive fluid on the damper discs. Rear ride height 3.5mm, pod level with chassis at ride height, maybe 1mm of sag in the pod when lifted.

CRC Courage body, or for a little less aggressive steering Parma Speed8.
Trips is offline