R/C Tech Forums - View Single Post - Orca B32 calibration
View Single Post
Old 06-03-2018 | 12:30 PM
  #8  
jgil089
Tech Regular
 
Joined: Nov 2017
Posts: 414
Default

Originally Posted by EbbTide
in that case you may want to try to get in touch with the seller you bought it from to see if they can help you get a replacement. Though I'm concerned since you said you've experienced somewhat erratic behavior before with your transmitter on other speed controllers. You don't by chance have an old radio and receiver, or maybe a friends that you can put in and try again. Because if the receiver is glitching then the speed controller won't really know when to calibrate. That's just something else to try before doing an RMA. Because if you do it'll most likely need to be sent to the distributor in Canada for replacement, depending on where your seller got it from.
Thanks, this was what I was hoping to avoid!

I am probably overstating the erratic behaviour previously, it was just a once off when the car was first turned on until I calibrated the ESC. I have a few other rx/tx I can try. I use this tx on my 4 racers without problem, so the tx is fine but this rx could be the problem.
jgil089 is offline