I installed a brand new 2.5 gen 3/ rsx combo into my new onroad project and first run out I ran into a problem. Only adjustment I made was to the CL which I dropped to led 3, but changing it back made no difference. The car moves nice and smooth when you ease it around, start giving it some throttle...like around 35%-50ish% or more, doesn't matter if you ease into it or from a start the cars steering slams to either direction becoming unresponsive and the motor cuts out, then after a delay it either slams in the other direction with a small hint of motor for a split second then stops and repeats a few times, or the steering becomes back online and centers with the motor coming back online instantly back to power which for this motor is scary. If I let off when it starts, it starts to work fine until I ease past that one point again, and if i hold it seems to work fine after it glitches out and comes back online until I slow the car down and it starts over.
Brand new battery, its a proteck lihv, fresh charge, transmitter is fine, no error lights when i run it on a bench, which it does perfectly fine. troubleshooting stopped when it stripped the spur.