R/C Tech Forums - View Single Post - Initial Brake Force?
Thread: Initial Brake Force?
View Single Post
Old 03-19-2018 | 07:37 PM
  #33  
gigaplex's Avatar
gigaplex
Tech Champion
iTrader: (2)
 
Joined: Dec 2015
Posts: 7,765
From: Melbourne, VIC
Default
Originally Posted by Phillip F
for HW XR10 Pro


I run 2wd buggy in carpet, 13.5 class
I am a point and shoot driver. apex to apex.
Brake Force : (0-100%)
the amount of brake the esc can do. I usually have it at default 100%
Initial Brake : (=drag brake, 0=50) I have it at 0 - 5 . In real cars, It's the amount of brake you apply while braking. 0 would be instant (no delay) 50 would be maximum delay in braking. If you have it on "=drag brake" setting ... set your drag brake. I don't use drag brake.
That's not what the initial brake setting does. If you set initial brake to 50%, a slight touch of the brakes would jump straight to 50% brake strength. It's not a delay.
gigaplex is offline  
Reply