Originally Posted by Lordzod

Yes it's indeed a bit confusing but you need to set your aux1 in code mode not code 10 .

you need to be aware that Sanwa limited the choices on what you could change remotely the first 4 settings can not be change via remote , you need to do this by yourself with the complicated menu navigation (led colors etc etc) to change those settings. Please take your time and activate reverse and bump up the temp settings (menu 3 to a higher setting) and activate option 4 if you need boost and timing options.
Aux 1 will give you the first 5 settings 　
Full Brake rate , Neutral Brake rate, Drive feel , Neutral Brake feel, Brake feel

and aux 2 will give you settings for boost if you need it
Boost timing (Advanced timing), Turbo , Boost curve

https://www.lrp.cc/fileadmin/product...107a54253a.pdf

the manual that came with your ESC should explain all of this ..