I have just purchased a Super Vortex Zero #107A54113A I trying to link my SSL from my MT-44 transmitter which Aux1(Code 10) or Aux2(Code 5) and the instruction manual show 12 programming mode but the Sanwa wedsite show only 8 programming mode. Which is which so confusing. Please advise thank you.
Yes it's indeed a bit confusing but you need to set your aux1 in code mode not code 10 .
you need to be aware that Sanwa limited the choices on what you could change remotely the first 4 settings can not be change via remote , you need to do this by yourself with the complicated menu navigation (led colors etc etc) to change those settings. Please take your time and activate reverse and bump up the temp settings (menu 3 to a higher setting) and activate option 4 if you need boost and timing options.
Aux 1 will give you the first 5 settings
Full Brake rate , Neutral Brake rate, Drive feel , Neutral Brake feel, Brake feel
and aux 2 will give you settings for boost if you need it
Boost timing (Advanced timing), Turbo , Boost curve
https://www.lrp.cc/fileadmin/product...107a54253a.pdf
the manual that came with your ESC should explain all of this ..
