Originally Posted by B3nno810

The upper shock cap bushings are horrible. Theyre too hard, and they constanly flog the caps out (they do on the buggy because of the metal caps). Even with the m2c bushes (delrin), the caps flog. Caps must be too soft also. You use fuel tube as the cap insert. It allows smooth shock movement and doesnt cause the shock caps to flog out. You cut a small section to fit the stand off, fit the shock onto it and then fit your nut. Dont over tension as you will cause binding. Works a treat. After changing about 6 sets of shock caps in a short period of time, i went to fuel tube and didnt need to change another set. Alot of people do it. Alot cheaper than buying shock bushes also.