Originally Posted by
gmintimidator
I'm running a 17.5 v16 in 1/12 stock blinky. The track is 60x60 old gray carpet. I've been experimenting with the motor but not getting the results. Which rotor should be used? I have the 1750 plus the standard and what timing should I be using? The motor typically comes off at 130 area on an 85 rollout with 40deg of timing. Any thoughts or suggestions?
Do you have the standard 12.5 rotor also??? According to R1wurks, the new torque tuned 12.5HT rotor is the best rotor for stock motors. It's has a lower gauss reading--less torque and more rpm than the 1750ht you currently own.
Since you are running on grey carpet I wouldn't get anything stronger than the torque tuned 12.5HT.
Now if you were on black carpet that would be a different story
idbdoug