Originally Posted by
antlockyer
Data is entered as follows.
Front suspension arm Y1 = 6.2mm
Laxle = 14.325mm
Shock mount L1 = 32.5mm
Upper mount point Y1 = 42.5mm
Shock length = 47.8mm
I've checked those numbers with other model to see if they are within the correct range and a quick glance at the maths would suggest that there is 35mm or so between top and bottom mount.
Is your Shock Length (47.8mm) the free length measurement of the shock when it's fully extended? Or is that what you measure the shock length when it's on the car?