Originally Posted by
Snowblind
I have a working setup here now. I will post pictures if anyone wants to see.
Very good. For sure I'm very interested in your prototype and improvement suggestions.
Originally Posted by
Snowblind
Does your version of the transponder output only one line per pass. I am viewing it with putty.
In standard mode, with putty you see only 'passing records' that is when the transponder is sensed just one message is sent to the timing software with transponder number and timestamp. The transponder itself always sends packets continuosusly. The decoder receives all of them but filters only the passages, and passages must be a minimum of 1 second apart. If you want to see all the packets received, with putty you must activate monitor mode (write MONITOR MODE + enter in the terminal). Switch back the behaviour with 'CANO MODE' command (it' the default at startup).