R/C Tech Forums - View Single Post - Yokomo YZ-4 SF
Thread: Yokomo YZ-4 SF
View Single Post
Old 12-10-2017 | 07:04 PM
  #7  
rhodopsine
Tech Addict
 
Joined: Jan 2003
Posts: 569
From: Montréal, Qc
Default

Originally Posted by Pekr.da.skurl
I cant believe none you have your car together and presented us with a complete review yet
Not a complete review, but a few building notes.

- Usual Yokomo quality and fit. Needed very little (.25mm shim here and there) to be good.
- Shocks now come with screw on shafts. Farewell e-clips! Not the titanium coated ones but still!
- I had to change the shims for the diffs. With the manual setup, mine were bound in their casing and the drivetrain was not free. I had to remove the 0.05 mm on each side and move a 0.10 from one side to the other.
- Clearance between the top rear suspension link and the rear shock spring is minimal
- The new rear suspension hangers are very nice, and is quite a bit easier to understand.

Martin Paradis
rhodopsine is offline