Originally Posted by
howardcano
I don't think you need anywhere close to that much torque, though it won't hurt. I'm currently running 0.05sec and 1.4kg*cm with no problems.
That is FAST!!!
Originally Posted by
Race19s
2 popular 12th scale servo specs.
Airtronics 94761:
Torque: 4.8V: 55.00 oz-in (3.96 kg-cm); 6.0V: 66.00 oz-in (4.75 kg-cm)
Speed: 4.8V: 0.15 sec/60°; 6.0V: 0.12 sec/60°
Futaba 9650:
Speed: .14 sec/60 degrees @ 4.8V - .11 Sec/60 Degrees @ 6.0V
Torque: 50.0 oz-in @ 4.8V - 62.5 oz-in @ 6.0V
Thanks so much! The booster I made can put out 6V+ (adjustable) so if I get something on the weaker end, I can bump up the voltage a little.