Originally Posted by
Johnny Wishbone
Thats the wrong spacer your trying to use there and they aren't actually used in that stage (probably a instruction issue thats being worked on), the ones you should use are in a individual package, these are 1mm thick and there are also some 2mm ones included in the kit. this is if you decide to flip the lower caster blocks and adjust the height setting.
Spacer on the left is a 1mm thick, 4mm internal
Middle is 2mm thick, 4mm internal
Bottom right are some 1mm thick, 3mm internal.
Measuring the screw it's a 4mm diameter for the thread, so I assume the 4mm ones as the 3mm won't fit. The book is saying the T2 7075, so I'm just confused.
The 5.5x4x1mm are already in the car.