Originally Posted by
MattDub
Hey Drebi,
You might be referring to the Ricochet setup. I used the stock rear camber mount with two m3x8 (TKR1221) washers under the ball studs and the optional LRC C and D blocks that lower the pills by 2mm. The LRC C and D blocks should be released shortly. In the meantime, you can lower the C and D pills to the lowest position. Mason Eppley did this on astro and it worked well. Did not use the lower tower, it was the full height rear tower.
Thanks dude
P.S. how was pocker in Vegas?