R/C Tech Forums - View Single Post - Hot Bodies D413 1/10 4WD Buggy
Thread: Hot Bodies D413 1/10 4WD Buggy
View Single Post
Old 10-01-2017, 08:05 PM
  #11538  
tc5 man
Tech Prophet
 
tc5 man's Avatar
 
Join Date: Oct 2007
Location: levittown pa
Posts: 16,997
Default
Originally Posted by Cain
whats your full setup?

I figured out one thing I had a loose Rear camber link on one side on the camber plate and the camber link ends were not free enough so I wiggle them with needle nose.

Setup its 7/60/5 diffs, 35w F/32.5 R with 3 hole 1.3 pistons and shocks down all the way down Front and ride height at 22mm with a Black Rear sway bar . Tires were Impacts soft/SS rears than Holeshots Front and Impacts Rear.
Last edited by tc5 man; 10-01-2017 at 08:16 PM.
tc5 man is offline  
Reply