Originally posted by Turtlemaster
if you mean a servo saver for the servo then no, the servo saver is on the steering posts.
NOPE not on the steering posts either. I was going to ask this ? also but haven't had any problems as of yet.
I took my BD out to 4 Fun Hobbies for some setup time yesterday and WOW is all I can say....Once I got the Droop and ride height set just right, the steering was insane..I almost had to turn the D rate down on the radio...
If you haven't been to 4 FUN and you live in the Southern California area...you need to take a road trip even just for testing....
Man that track requires nothing....Ok Maybe more tables but other than that it is great. No need to brign Paragon just some take off 27's.
Here is the current setup.
Droop is = to the chassis right equal with the inner rim of the tires in the front and about a mm more in the rear...sorry don't have my droop gauge handy but that way worked perfect.
Ride height is 4-4.5mm in the front and 5mm in the rear.
Camber is 2 degrees all around
Toe is out .5 degree.
Hoep this helps.
OH this setup is for hi bit asphalt
Everything else is the stock out the box setup.. Springs and oil and sway bars.
Hope this helps,
Stephen <><