R/C Tech Forums - View Single Post - R1 Wurks brushless motors
View Single Post
Old 08-17-2017, 05:33 AM
  #415  
Jorge T
Tech Addict
iTrader: (14)
 
Jorge T's Avatar
 
Join Date: Mar 2011
Location: At a chemical plant in TX
Posts: 584
Trader Rating: 14 (100%+)
Default

Originally Posted by nexxus
Yeah I know what the meters are just wondering what one they use, as I have a Trinity Igauss which measures a lot lower than a Fantom Facts Machine 3 I just got, and seen some using the Facts Machine 2 and the Racing Measurement Systems unit, so would be good to know what they are using so we can compare apples with apples.

I have a Facts Machine 2
R1
12.3mm read 1435-1455
12.5mm read 1515-1525

Motiv
12.3mm (25.5) 1480-1490 rated at 1607 avg(inc sheet)
12.5mm S high 1580-1590 rated at 1698 avg(inc sheet.)
After several runs, rotor has barely lost 5-8 gauss. I run 1/12 with a 25mm fan. Motor has never reached over 140*F.

TSR
12.5 4 line ,1525-1535 rated 1640 gauss on sheet

It looks like the FM2 that I have reads 120-122 gauss lower than the rated Motiv or TSR rotors.


We also have a R1 motor that no mater what timing it overheats. The motor got extremely hot once, over 225*F and the rotor practicaly died.
It measured 844 gauss afterwards.

The stator had no signs of damage it still reads 36.7-36.8mohm like it read new. Its still runs hot with a new rotor.
Jorge T is offline