Originally Posted by thefnshow

Ok, I used the corners from my durango desc410v2...arms,hubs,drive shafts and wheel he's a...I also got lunsford punished turnbuckles 2 7/8 length...I have a k2 rear shock tower on the front and losi shocks all the way around with the losi shock stand offs..on the rear I used 1/2 aluminum spacers to raise the rear end due to the longer losi shocks...front shocks have a 1/4 inch spacer inside each shock as they were too long...the slick short course tires are only for mock up...durango 14mm hexes and 14mm stadium rims will be here tomorrow...got to figure out a body still