Originally Posted by
dman18t
just keep in mind that the body is a fine tune option for setup. With a good suspension setup, any body can be made to work. So only change bodies once your sure the car is setup well, then fine tune with bodies to get that last little bit.
Copy that. With that said I tried chasing down the high speed off throttle oversteer stability issue. Knowing what I know from full scale I first went softer in the rear and that helped until I took spacers out off the springs (no/very little spring pre-load). That made it worse, I am thinking there is to much droop in the rear? I may take the rear shock apart and put some spacers on the shock shafts to reduce the droop and see if that helps at all.
Keep in mind this is a lowly TT02 which does not incorporate droop screws.
Thanks.
Cheers,
Jim