Originally posted by RClover
Currently, i am using the Lower hole the stud ball which i think is wrong as i noticed the manual is fitted on the Upper hole.
Could you confirm this?
Because when i tried on the Upper hole, the shocks were compressed and become STIFF and HARD and the chassis was raised to 10-11mm...and i couldnt bring the ride height down...what's wrong here?
Don't use the lower hole. Kyosho made the lower H-arm that way so it can be used for left and right, i guess. You shouldn't be able to use the lower hole becasue the shock body would be rubbing against the H-arm. Wonder how you did it. Did you used the end caps for the front shocks ?
If the spring is too long that would happen. Also check if you used the right end caps. The front end caps are thicker than the rear end caps.
Data