-It almost sounds like you are in the display mode? The display mode comes on when you press the left power button. It gives a red message on the left side of the screen saying "display". Make sure you are only pressing the right side power button.

- If you aren't in the display mode go to the Receiver screen and select a different Rx and turn off the Tx. Then turn on the Rx first (it should flash red). Next turn on the Tx. Go to the Receiver screen and reselect the Fasst Rx. See if it ask you about the failsafe. If it does select "yes/agree/accept" (whichever one it offers). The Rx should go flashing green if I remember correctly. Now hold the Tx right next to the Rx and press the Rx bind button. The Rx led should go to solid green. If this doesn't work I would contact Futaba.