This. I also don't believe the app was properly reading the current settings nor was there a button to get the current settings. The refresh looking button tries to bind with a bluetooth receiver. This was with a hotwire 1 and RS Gen2.

After having difficulties at the track last night I've now been able to test the Android App together with the Windows app. As far as I can tell, the only datalog related thing in the android app now is the option to clear the log by holding the brake. For the most part my settings were accurate and my memory failed. There is one mismatch that I was able to confirm though. On the Android app the maximum value for the throttle minimum is 20. In the windows app the maximum value is 30. If I have it set to 30 in windows it appears to reset to the default value in the android app. This is what led me to believe that the settings were not being read correctly last night.

Touching the refresh looking button in the upper right while connected to my hotwire 1 puts the android app into demo mode. Pressing it a second time triggers a search for bluetooth connected devices. No where can I find anything that will reconnect or refresh settings with the wired hotwire. The only way to get connected again is to unplug and close the app.

Was this update pushed out by mistake? It really seems unfinished. I'd be happy to help with user acceptance testing if you need more input.