Originally Posted by
vettehigh
How is the fit with this Tekin being 77mm? Also, what does this package come with and do I need anything else with it (Battery connector etc.)? I will be using a T-plug. If you have a link for one, please send it. Thank you
https://www.amainhobbies.com/tekin-r...tt2481/p637115
Sorry I rushed through and didn't answer your other questions lol.
If you just need a Dean's for the ESC, these will work
https://www.amainhobbies.com/deans-m...-wsd1302/p3597
But if you need to wire a battery as well, then this will give you the male and female connections
https://www.amainhobbies.com/deans-u...-wsd1300/p3596
As for everything included with the combo, at the very least there should be a sensor wire included for the motor along with a manual and a bunch of stickers. There will be an ESC fan too but it might already be installed on the unit. I'm not entirely certain if Tekin provides power wires with their ESC's so it would be a good idea to get some 12 or 10 guage wire from your favorite wire maker. I like Tekin and TQ. But I can't find 12ga or lower from TQ right now. And I don't think 13ga would be appropriate for a truggy system.
https://www.amainhobbies.com/tekin-1...tt3013/p218990