R/C Tech Forums - View Single Post - sand in lipo hardcase
View Single Post
Old 05-06-2017 | 06:11 PM
  #2  
Ominex's Avatar
Ominex
R/C Tech Elite Member
iTrader: (17)
 
Joined: Sep 2016
Posts: 158
From: Texas
Default

It really depends. I'd say that if it charged and is not puffed they more than likely it's fine. See if you can peel back the balance plug seal a little and shake out whatever is in there.

I had that happen to some cheap Turnigy batteries one time. One was just some small rocks but the other had some small bits of solder and flux left over from the factory...not good.
Ominex is offline